For a distributor listing or to order, please call (928) 778-1112, Fax (208) 279-5904
or e-mail jim@jastein.com

Tools For Cranks and Bottom Brackets

New Item! Click the photo for more details!
Cartridge Bottom Bracket Handle




Crank Extractor System
Consists of a special oversize 24 x 1.5 mm piloted tap and pilots to cut new threads into stripped out crank arms while in place on the spindle. The crank is then extracted using a semi-permanently installed combination dust cap/extractor installed in the new threads. The kit contains several of the dust cap extractors and they are also available individually. A conventional puller is available for use with stud type spindles. Part #CES

Fixed-Cup Wrench Clamp

 

 

Use your present bottom bracket fixed-cup spanner wrenches to install or to remove cups with maximum torque without damaging your knuckles, wrenches, or the frame finish. Since the bottom bracket does not have to be disassembled (as with other fixed cup tools) it is especially well suited for new bike assemblies to be sure the fixed-cup has been sufficiently tightened. The Fixed Cup Wrench Clamp fits most current cotterless crank sets. The center bolt is threaded to fit "bolt-on" type spindles.
Part #FCC-2

 


Locking Lockring Wrench

This tool clamps to most common bottom bracket lockrings with specially contoured jaws to remain centered and prevent the tool from slipping, permitting the lockring to be tightened more precisely and with more torque. By increasing the clamping force, the adjustable cup can be made to turn with the lockring to further assist in a precise adjustment. Part #LW

Home