The Stein Parts Cleaner tackles all kinds of dirty greasy parts without using flammable solvents. It uses a water based cleaner which is activated with a thermostatically controlled heater and pumped through a brush which you can direct exactly where it is needed. This eliminates the smelly solvents in the air and on your hands.
	View of the cleaner installed with one sink for parts cleaning and one for rinsing (Click photos for larger images!)	Front view under sink
Left side with pump showing	Detail view with lid up showing pump and heater	Pump and level gage shown
		This unit is to be installed by the user under a sink which can be installed in a workbench or free standing. It operates on 120 volts. The insulation prevents loss of heat from the cleaning solution.
Bare stainless tank with fitting for heater and level gage	Heater element and thermostat installed on tank

Available directly. Cost: $350

Includes the stainless steel tank, insulation box, pump, heater, thermostat, flow through brush and level gage. Sinks, faucet/valves and drain pipes to be acquired by the owner.

Any questions? Please send email to jim@jastein.com

Home

The parts cleaner unit from the J. A. Stein Company consists of an insulated stainless steel container which heats the detergent solution for maximum cleaning efficiency and pumps it to a brush with a recirculating pump to be directed where needed.